17 research outputs found
Development of Dual-Gain SiPM Boards for Extending the Energy Dynamic Range
Astronomical observations with gamma rays in the range of several hundred keV
to hundreds of MeV currently represent the least explored energy range. To
address this so-called MeV gap, we designed and built a prototype CsI:Tl
calorimeter instrument using a commercial off-the-shelf (COTS) SiPMs and
front-ends which may serve as a subsystem for a larger gamma-ray mission
concept. During development, we observed significant non-linearity in the
energy response. Additionally, using the COTS readout, the calorimeter could
not cover the four orders of magnitude in energy range required for the
telescope. We, therefore, developed dual-gain silicon photomultiplier (SiPM)
boards that make use of two SiPM species that are read out separately to
increase the dynamic energy range of the readout. In this work, we investigate
the SiPM's response with regards to active area ( and
) and various microcell sizes (, , and ). We read out CsI:Tl chunks
using dual-gain SiPMs that utilize microcells for both
SiPM species and demonstrate the concept when tested with high-energy gamma-ray
and proton beams. We also studied the response of $17 \times 17 \times 100 \
\mathrm{mm}^30.25-400 \ \mathrm{MeV}2.5-30 \ \mathrm{MeV}$. This development aims to demonstrate
the concept for future scintillator-based high-energy calorimeters with
applications in gamma-ray astrophysics
Development of a CsI Calorimeter for the Compton-Pair (ComPair) Balloon-Borne Gamma-Ray Telescope
There is a growing interest in astrophysics to fill in the observational
gamma-ray MeV gap. We, therefore, developed a CsI:Tl calorimeter prototype as a
subsystem to a balloon-based Compton and Pair-production telescope known as
ComPair. ComPair is a technology demonstrator for a gamma-ray telescope in the
MeV range that is comprised of 4 subsystems: the double-sided silicon detector,
virtual Frisch grid CdZnTe, CsI calorimeter, and a plastic-based
anti-coincidence detector. The prototype CsI calorimeter is composed of thirty
CsI logs, each with a geometry of .
The logs are arranged in a hodoscopic fashion with 6 in a row that alternate
directions in each layer. Each log has a resolution of around
full-width-at-half-maximum (FWHM) at with a dynamic energy
range of around . A array of
SensL J-series SiPMs read out each end of the log to estimate the depth of
interaction and energy deposition with signals read out with an IDEAS ROSSPAD.
We also utilize an Arduino to synchronize with the other ComPair subsystems
that comprise the full telescope. This work presents the development and
performance of the calorimeter, its testing in thermal and vacuum conditions,
and results from irradiation by monoenergetic gamma-ray
beams. The CsI calorimeter will fly onboard ComPair as a balloon experiment in
the summer of 2023
AXTAR: Mission Design Concept
The Advanced X-ray Timing Array (AXTAR) is a mission concept for X-ray timing
of compact objects that combines very large collecting area, broadband spectral
coverage, high time resolution, highly flexible scheduling, and an ability to
respond promptly to time-critical targets of opportunity. It is optimized for
submillisecond timing of bright Galactic X-ray sources in order to study
phenomena at the natural time scales of neutron star surfaces and black hole
event horizons, thus probing the physics of ultradense matter, strongly curved
spacetimes, and intense magnetic fields. AXTAR's main instrument, the Large
Area Timing Array (LATA) is a collimated instrument with 2-50 keV coverage and
over 3 square meters effective area. The LATA is made up of an array of
supermodules that house 2-mm thick silicon pixel detectors. AXTAR will provide
a significant improvement in effective area (a factor of 7 at 4 keV and a
factor of 36 at 30 keV) over the RXTE PCA. AXTAR will also carry a sensitive
Sky Monitor (SM) that acts as a trigger for pointed observations of X-ray
transients in addition to providing high duty cycle monitoring of the X-ray
sky. We review the science goals and technical concept for AXTAR and present
results from a preliminary mission design study.Comment: 19 pages, 10 figures, to be published in Space Telescopes and
Instrumentation 2010: Ultraviolet to Gamma Ray, Proceedings of SPIE Volume
773
Effects of rain and soil moisture on background neutron measurements with the SuperMISTI neutron array
Background neutron measurements were recorded for approximately two months at Camp Blanding, FL, with a large array of moderated gas proportional detectors and EJ-309 liquid scintillator detectors. The variations in the local neutron background rate were on the order of 10% and were observed to be primarily due to the changing level of moisture in the local soil due to precipitation and evaporation. Simple models were constructed based only on very basic climatological information and were able to reproduce the major variations in our measured neutron counts with time. These simple models compare favorably to the more-complex modified Penman equation developed for the California Irrigation Management Information System. An accurate model to describe local neutron background variations based on easily measured climatological data would be invaluable to provide corrections for stationary neutron monitors
Recommended from our members
Gamma Ray Imaging for Environmental Remediation
The goal of this project is the development of field portable gamma-ray detectors that can both image gamma rays from radioactive emission and determine the isotopic composition by the emitted spectrum. Most instruments to date have had either very good imaging with no spectroscopy, or very good spectroscopy with no imaging. The only instruments with both imaging and spectroscopy have had rather poor quality imaging and spectroscopy (e.g. NaI Anger Cameras). The technology would have widespread applications, from laboratory nuclear physics, to breast cancer imaging, to astronomical research. For this project, we focus on the applications in the field of fissile materials, spent nuclear fuels and decontamination and decommissioning